Description
The Enova DGX DXLink 4K60 Fiber Input Board is HDMI 2.0 and HDCP 2.2 compliant. It supports 4K60 4:4:4 video and High Dynamic Range (HDR) for optimum image quality and pixel-for-pixel image reproduction without chroma subsampling. DXLink 4K60 Fiber allows end users to realize the full potential of their source and display devices by fully supporting 36-bit Deep Color for the richest, most realistic video.
This board has four inputs and receives audio, video, control, USB 2.0, and Ethernet over duplex fiber from a DXLink 4K60 Fiber transmitter up to 300 meters away. Each input includes a Multi-Mode Duplex (MMD) SFP, which can be replaced with a Single-Mode Duplex (SMD) SFP if needed. This board is compatible with Enova DGX 100-Series enclosures and DXLink 4K60 Fiber transmitters.
Specifications
| Connectors | (4) Duplex LC Fiber Ports, conforming to ANSI TIA/EIA 604-10 (FOCIS 10A); (4) Mini-USB AB Ports |
| Compatible Formats | HDMI Video, Audio, Ethernet, USB(HID), USB (2.0), Serial Control, and IR Control |
| Signal Type Support | DXLink Multimode Fiber, Duplex NOTE: DXLink 4K60 Fiber boards ship with Multimode Duplex Fiber SFP+ modules installed. These can be field replaced with compatible 10G Single-mode Duplex Fiber SFP+ modules in applications where single-mode fiber is required. |
| Maximum Resolution Support | 480p up to 3840×2160 @ 60Hz 4:4:4 and 4:2:2, including:
|
| Audio Format Support | Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD MA, DTS-HD High Resolution, DTS, 2 CH through 8 CH L-PCM – Dolby Digital and DTS support up to 48 kHz, 5.1 Channels – When a downstream DXFP-RX- 4K60 is in the signal path, audio formats other than 2CH LPCM and Dolby Digital 5.1 require the DXFP-RX-4K60 to have its scaler set to bypass. |
| AIE Board Support | Yes, supports extraction of 2 CH LPCM |
| Audio Switching Board Support | Supports break-away audio switching of 2 CH L-PCM for all channels Supports downmix from one input channel of Dolby Atmos, Dolby True-HD, Dolby Digital Plus, Dolby Digital, DTS-HD MA, DTS-HD High Resolution, DTS, or 2 to 8 channel L-PCM Downmix supported on 4k video inputs with pixel clocks up to 297MHz (up to 3840x2160p @ 30Hz) |
| USB | USB HID and USB 2.0 are supported point-to-point to DXLink 4K60 HDMI Transmitters. The DXLink Output board is automatically configured as either Host or Device depending on the mode selected on the attached DXLink 4K60 Receiver. |
| Compatible DXLink TX/RX | DXLink 4K60 Fiber Transmitters (DXFP-TX-4K60) |
| FG Numbers | FG1061-624 |
Reviews
There are no reviews yet.