Description
The PC1 control provides one switched outlet for 120 VAC power control with up to 1200 W of equipment power.
| Dimensions (HWD) | - 1 1/2″ x 5 1/2″ x 5 1/2″ (3.8 cm x 14 cm x 14 cm)
- RU: 1
|
| Weight | |
| Power Requirements | - Power Input: 105 to 125 VAC, 3 watts maximum (internal electronics)
- Power Outputs: 1 switched 3-wire sockets, 120 VAC, 1,200 watts total
|
| Control Ports | - Either one latched or two momentary closures for discrete on and off, or one momentary closure for toggling on and off
- Switched AC receptacle, 10 A at 120 VAC
|
| Load Fuse | Internal 10 A (load capacity) |
| Control Inputs | Remote control contact and switch closure |
| Enclosure Material | Metal with black matte finish |
| Type | AC switched power control unit |
| Front Panel Components | - AC1 power switch controls power to a switched socket. The LED in the pushbutton indicates that socket power is ON
- DIP Switch: Controls the AC1 (and AC2) push button operating mode, depending on the setting of the switches
|
| Rear Panel Components | - AC Power Input: 3-conductor line cord providing 120 VAC power to the power control unit and to switched power sockets
- Switched Power: Socket for control of external equipment having a total power load of 1,200 watts. An internal 10 A load fuse is provided (The PC2 has 2 power sockets)
- Control: 4-pin captive-wire connector providing remote operation of the power control units. Terminals accept 24 – 12 AWG wire
|
| Power cables | 6 ft (1.83 m) cord with 3-wire grounded plug |
| FG Numbers | FG670 |
Reviews
There are no reviews yet.