Description

Balancing value and strong audio performance, the Audio-Technica AT2035 condenser microphone offers a smooth and detailed sound at a price point that’s accessible for home-based musicians, vocalists, and podcasters. The large-diaphragm condenser capsule incorporates a cardioid polar pattern for minimal feedback and off-axis noise, a welcome trait when tracking in untreated rooms. Plus, the supplied custom shockmount helps keep extraneous handling and foot noise down.

Engage the -10 dB pad to increase headroom and capture incredibly loud sources up to 158 dB SPL without distortion. When low-frequency rumble/hum or overwhelming bass invade your signal, turn on the 80 Hz high-pass filter switch to attenuate the lows without resorting to EQ. Since the AT2035 is a solid-state condenser with an XLR output, it should be mated to an XLR-equipped mic preamp capable of sending 48V phantom power, or anything between 11 to 52 VDC.

At Home or Onstage

Designed for critical home/project studio applications and live performance, this side-address cardioid condenser delivers detailed sonics and low noise. With its smooth, natural sound, the AT2035 is ideal for musicians, streamers, podcasters, and other content creators.

Selectable Settings

Equipped with a switchable 80 Hz high-pass filter and -10 dB pad, the AT2035 easily handles high sound pressure levels (up to 158 dB) and avoids the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation, and mechanically coupled vibrations.

Ready for Daily Use

Along with its rugged construction and high-performance specifications, the AT2035 provides reliable consistency from model to model. It comes with a protective pouch and a custom shockmount.

Features at a Glance

• Large diaphragm for smooth, natural sound and low noise

• High SPL handling and wide dynamic range provide unmatched versatility

• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source

• Switchable 80 Hz high-pass filter and -10 dB pad

• Custom shockmount provides superior decoupling from vibrations

• Operates on 11 to 52 VDC phantom power from a range of devices such as portable mixers, desktop audio interfaces, or external mic preamps

• Balanced XLR 3-pin output connector

Audio-Technica ATH-M20x Closed-Back Monitor Headphones (Black)

Bringing the acclaimed features of the M-Series headphones to a price point that’s accessible for all, the black Audio-Technica ATH-M20x monitor headphones offer solid build quality and audio performance for musicians and content creators recording and mixing at home. Outfitted with 40mm dynamic drivers and an over-ear, closed-back design, the ATH-M20x headphones deliver enhanced bass response and wide bandwidth (15 Hz to 20 kHz) while isolating you from outside sounds.

Thanks to the 15° swiveling earcups, high-quality materials, and generous cushioning on the headband and earpads, the headphones are both durable and comfortable to wear. Exiting from the left earcup, the attached 9.8′ cable reduces tangles and simplifies channel identification. The cable sports a 3.5mm mini plug for use with mobile devices and computer soundcards, and a 1/4″ snap-on adapter is included for easy hookup to audio interfaces, mixers, and stereo receivers.

40mm Drivers

The ATH-M20x features 40mm dynamic drivers with rare earth (neodymium) magnets and CCAW (copper-clad aluminum wire) voice coils for quality sound reproduction at a competitive price point.

Tuned for Enhanced Bass Response

The drivers and headphone design work together to provide a sonic signature tuned for enhanced bass performance. With a frequency response of 15 Hz to 20 kHz, the ATH-M20x can reproduce a full spectrum of tones.

Over-Ear, Sound-Isolating Design

The ATH-M20x utilizes a circumaural design that contours around the ears for excellent sound isolation in loud environments. This over-ear, closed-back style is optimal for reducing bleed and separating you from outside sounds.

15° Swiveling Earcups

Equipped with 15° swiveling earcups, the ATH-M20x ensures a great fit.

Attached Single-Sided Cable

Keeping it simple and clean, the ATH-M20x incorporates an attached 9.8′ cable that exits from the left side. This increases convenience and makes it easier to distinguish the different sides of the headphone.

3.5mm Plug and 1/4″ Snap-On Adapter

The attached cable is terminated with a straight 3.5mm TRS mini plug for easy hookup to mobile devices, MP3 players, and computer headphone jacks. A 1/4″ snap-on adapter is included for compatibility connectivity with audio interfaces, mixers, and dedicated headphone amplifiers.

Solid Build Quality

Thanks to the high-quality materials used in the ATH-M20x, the headphones balance comfort and strength while delivering enhanced audio and effective isolation.