Description
The Vaddio RoboSHOT 12 HD Robotic PTZ Camera System for AV Bridge MATRIX PRO features an Exmor 1/2.8″ 2.38MP sensor that allows the camera to capture images at 1080p resolution. It features tri-synchronous multi-axis motion technology that allows the RoboSHOT cameras to move all three axes (pan, tilt, and zoom) simultaneously. The algorithm calculates the position and velocity of the smooth, direct-drive motor movements between the presets so pan, tilt, and zoom arrive at the preset subject simultaneously, which allows for smooth and manageable on-air camera movements.
Vaddio RoboSHOT 12 Specs
| Image Device | 1/2.8″ Exmor CMOS sensor |
| Video Resolution | 1080p60 / 59.94 / 50 / 30 / 25
1080i60 / 59.94 / 50
720p60 / 59.94 / 50 |
| Features | Tri-Synchronous Motion: Concurrent PTZ motor movement and simultaneous PTZ arrival at stored preset
Advanced ISP: Vivid and accurate color reproduction with fast, sharp automatic focus and iris routines |
| Aspect Ratio | 16:9 |
| Total Pixels | 2.38 Million |
| Effective Pixels | 2.14 Million |
| Lens | Super Wide Mode (12x Optical Zoom): 73° (Wide) to 6.6° (Tele)
Focal Length: 3.91 to 47mm, f/1.8 to f/3.4Normal Mode / Default Mode (10x Optical Zoom): 67.3° (Wide) to 7.6° (Tele)
Focal Length: 3.8 to 38mm, f/1.8 to f/3.4 |
| Minimum Illumination | 1 Lux (f/1.8, 50 IRE)
Recommended Illumination: >100 Lux and <100,000 lux |
| Minimum Working Distance | Wide, Tele: 0.4″ (1 cm), 31.5″ (80 cm) |
| S/N Ratio | >50 dB |
| Sync System | Internal |
| White Balance | Auto, ATW, indoor, outdoor, one-push, manual (accessible through external control) |
| Gain | Auto / Manual (0 to 28 steps; accessible through external control) |
| Backlight Compensation | On/Off (via IR remote) |
| Focusing System | Auto Focus / Manual Focus Mode / One-Push Trigger Mode / Infinity Mode / Near Limit Mode |
| Noise Reduction | On/Off, six steps, Off through five (accessible through external control) |
| Aperture | 16 Steps (accessible through external control) |
| Control Interface | RS-232 API:
Modified VISCA emulation (TTL signal level), baud rate of 9600 and 38,400 bps, 1-stop bit; default to 9.6 kb/s for Cat5e distance
Telnet serial command API
Internal web page for network setup, firmware updates, and network management
Vaddio IR Remote Commander |
| Pan & Tilt | Pan Angle: ±160°
Tilt Angle: +90°, -30°Speed on Both Axes 0.35° to 120°/sec |
| Rear Panel Connectors | Network: RJ-45 with green & yellow LED to show connection and usage
RS-232: RJ-45 carries bidirectional control to and from the camera
EZ Power Video: Shielded RJ-45 carries power and differential video signals for the quick-connect Cat5 systems |
| Rear Panel Controls | 16-Position rotary switch for resolution selection
8-Position DIP switch for IR frequency, image flip, wide mode, and reset to default settings |
| Power Supply | Powered by quick-connect SR interface |
| Operating/Storage Temperature | 32 to 104°F (0 to 40°C) |
| Humidity | 20 to 80% |
| Dimensions | 6.9 x 7.1 x 6.8″ (17.6 x 17.9 x 17.2 cm) |
| Weight | 4.9 lb (2.2 kg) |
Reviews
There are no reviews yet.