Description
The RoboSHOT 20 UHD OneLINK Bridge System from Vaddio combines a silver and black RoboSHOT 20 UHD PTZ camera and OneLINK Bridge interface. It is suitable for use in distance learning and corporate environments. The system captures 3840 x 2160 video at 30p from a single 1/2.3″-type Exmor sensor and transmits it up to 328′ over CAT5e/6 cable. The combination enables powering the camera, sending control signals, and transmitting video over a single cable.
Vaddio RoboSHOT 20 UHD Ultra High Definition PTZ Camera (Silver/Black) Specs
Camera
| Sync System | Internal |
| Sensor | 1/2.3″-type Exmor R CMOS |
| Pixels | Total: 9.03 MP
Effective: 8.93 |
| Minimum Illumination | Color: 3.0 lx (F1.8, 50IRE) |
| Zoom | Optical: 12x
Digital: 1.67x
Combined: 20x |
| Horizontal Field-of-View | Wide: 74°
Tele: 4.8° |
| Focusing | Auto Focus
Manual Focus Mode
One-Push Trigger Mode |
| Minimum Focus Distance | Wide: 0.4″ / 10 mm
Tele: 59.1″ / 1500 mm |
| White Balance | Auto
ATW
Indoor
Outdoor
One-Push
Manual |
| Aperture/Detail | 16 Steps |
| Gain | Auto / Manual (0 to 33 dB) |
| Backlight Compensation | On/Off |
| Noise Reduction | 6 Steps |
| S/N Ratio | Over 50 dB |
| Output | Protocols
HDMI
HDBT
HD-SDI
IP (H.264)Aspect Ratio HDMI: 16:9 (all resolutions)
IP (H.264) Streaming: 16:9, 3:2, 4:3 HDMI Resolutions/Frame Rates
3840 x 2160: 30/25 fps
1080p: 59.94/50/29.97/25
1080i: 59.94/50
720p: 59.94/50 3G-SDI
1080p: 59.94/50/29.97/25
1080i: 59.94/50
720p: 59.94/50 Streaming: Simultaneous IP (RTSP format with H.264 compression) up to 1080p/30 |
PTZ
| Pan | Angle: -160 to 160°
Speed: 0.35°/sec to 120°/sec |
| Tilt | Angle: +90 to -30°
Speed: 0.35°/sec to 120°/sec |
| Control | Vaddio IR remote commander
Web interface
Telnet
RS-232 API (modified VISCA) |
Physical and Environmental
| Power | 12 VDC, 3A power supply
LTPoE |
| Temperature & Humidity | Operating
23 to 140°F / -5 to 60°C
20 to 80% RH (non-condensing)Storage
-4 to 140°F / -20 to 60°C
20 to 95% RH (non-condensing) |
| Dimensions | 7.9 x 8.0 x 7.7″ / 20.0 x 20.3 x 19.6 cm |
| Weight | 6.0 lb / 2.7 kg |
Packaging Info
| Package Weight | 10.45 lb |
| Box Dimensions (LxWxH) | 13.5 x 12.4 x 11.6″ |
Vaddio OneLINK Bridge A/V Interface Receiver For HDBaseT Cameras (North America) Specs
General
| Compatibility | Vaddio RoboSHOT 12E / RoboSHOT 30E HDBT / RoboSHOT 20 UHD / RoboSHOT 40 UHD / RoboSHOT IW / DocCAM 20 HDBT |
| Video Format | Up to 1080p60 |
Inputs / Outputs
| USB I/O | 1 x USB-B 3.0 / 3.1/3.2 Gen 1 Female Output |
| Video I/O | 1x HDMI Output
1x BNC (3G-SDI) Output |
| Audio I/O | 2x Block 3-Pin Line/Mic Input
2x Block 3-Pin Line/Speaker Output |
| Other I/O | 1 x RJ45 Ethernet
1 x RJ45 RS-232 Serial
1 x RJ45 OneLINK Digital Camera Interface |
| Cable Distance Supported | Maximum 328′ / 100 m |
| Power Input | DC Barrel |
Power
| Power Source | AC Input |
| DC Input Power | 48 VDC at 1.36 A |
| Certifications | CE, FCC, TAA, UL |
| Operating Temperature | 32 to 72°F / 0 to 40°C |
| Operating Humidity | 15 to 80% () |
| Storage Temperature | -4 to 140°F / -20 to 60°C |
| Storage Humidity | 15 to 80% (Non-Condensing) |
Physical
| Dimensions | 8.4 x 6 x 1.7″ / 21.3 x 15.2 x 4.4 cm |
| Weight | 3.3 lb / 1.5 kg |
Packaging Info
| Package Weight | 3.43 lb |
| Box Dimensions (LxWxH) | 12.3 x 9.3 x 3.2″ |
Reviews
There are no reviews yet.